Do you serve a particular region of the country? As demonstrated below, we can set up zip code collectors to set parameters according to where a structure will be sent/built. We will need either a list of zip codes or a KML file. (This should be provided by the customer - your web admin can help with this most likely.)
Starting Designs
We use “style” as basic starting points for your building configurations. These will be shown in the menu on the right-hand side of your configurator (example below). What are 4 - 8 “styles” that you would like to represent in your configurator?
Note, we currently do not support greenhouses, animal shelters and other unique buildings. The list above is a good list of what we do support.
Roof Type
What is the roof profile for each style? E.g., gable, lean, gambrel, etc.?
What are the roof pitch options for each style?
Does roof pitch vary according to size?
What type of roofing do you offer for each style? E.g., PBR, asphalt shingles, architectural shingles, etc.?
What roof overhang options do you offer? Are any roof overhangs standard for a certain style?
What style of porches do you have?
Do your porches apply only to certain building styles? E.g., “do not apply porches to garage styles”
Are there any sides to which porches cannot be added? E.g., “do not add porches to the back of sheds”
Please report any associated logic that is based on your building styles. For example, “length of attachments should never exceed the length of the main building”
NOTE: we currently do not support lean to style porches.
Basic Styles
For each style created as your starting design, please give us the available lengths, widths, and heights.
Please report any associated changes that come along with basic size changes. For example, “Buildings over 60 feet wide have a pitch of 3/12”
What types of siding do you offer?
Are their certain colors for certain siding types?
Please provide examples of what your siding looks like
Do you offer wainscot?
What is the standard height of your wainscot?
What material is your wainscot?
What is the width and depth of your trim?
Standard Trim
Fascia Trim
Component Trim (around doors and windows)
Do you have any special trim options you offer?
What are the names, details, and sizes of any single doors you would like to offer?
What are the names, details, and sizes of any double doors you would like to offer?
What are the names, details, and sizes of any garage doors you would like to offer?
What are the names, details, and sizes of any overhead/roll-up doors you would like to offer?
What are the names, details, and sizes of any sliders you would like to offer?
Additional charges will apply if we need to add custom doors not already in our library and offering.
What are the names, details, and sizes of any windows you would like to offer?
What are the sizes and details of any cupolas you would like to offer? (only available with Pro Subscription)
What are the sizes and details of any shed dormers you would like to offer? Note, we currently support shed dormers with transom windows and gable dormers, we do not currently support dollhouse dormers.
What color options do you offer for the siding of your buildings? Please provide in either RGB or HEX values.
Are your roof, trim, wall, and wainscot color options the same?
Do you allow customers to change sidewall color independent from end wall color?
If needed, can you provide RGB/HEX values or high-quality textures for your color options? (Additional charge applies to these.)