...
We use “style” as basic starting points for your building configurations. These will be shown in the menu on the right-hand side of your configurator (example below). What are 4 - 8 “styles” that you would like to represent in your configurator?
Note, we currently do not support greenhouses, animal shelters and other unique buildings. The list above is a good list of what we do support.
Roof Type
What is the roof profile for each style? E.g., gable, lean, gambrel, etc.?
What are the roof pitch options for each style?
Does roof pitch vary according to size?
What type of roofing do you offer for each style? E.g., PBR, asphalt shingles, architectural shingles, etc.?
What roof overhang options do you offer? Are any roof overhangs standard for a certain style?
...
What style of porches do you have?
Do your porches apply only to certain building styles? E.g., “do not apply porches to garage styles”
Are there any sides to which porches cannot be added? E.g., “do not add porches to the back of sheds”
Please report any associated logic that is based on your building styles. For example, “length of attachments should never exceed the length of the main building”
NOTE: we currently do not support lean to style porches.
Size
Basic Styles
For each style created as your starting design, please give us the available lengths, widths, and heights.
Please report any associated changes that come along with basic size changes. For example, “Buildings over 60 feet wide have a pitch of 3/12”
...
What are the sizes and details of any cupolas you would like to offer? (only available with Pro Subscription)
What are the sizes and details of any shed dormers you would like to offer? Note, we currently support shed dormers with transom windows and gable dormers, we do not currently support dollhouse dormers.
Colors
What color options do you offer for the siding of your buildings? Please provide in either RGB or HEX values.
Are your roof, trim, wall, and wainscot color options the same?
Do you allow customers to change sidewall color independent from end wall color?
If needed, can you provide RGB/HEX values or high-quality textures for your color options? (Additional charge applies to these.)
Please review our list of currently not supported items - we are unable to provide support for these at this time: