IdeaRoom for Buildings Onboarding

Geography

• Do you serve a particular region of the country? As demonstrated below, we can set up zip code collectors to set parameters according to where a structure will be built.

Open

Style

Starting Designs

• We use “style” as basic starting points for your building configurations. These will be shown in the menu on the right hand side of your configurator (example below). What are 4 - 8 “styles” that you would like to represent in your configurator?

Open

Roof Type

• What is the roof profile for each style? E.g., gable, lean, gambrel, etc.?

• What are the roof pitch options for each style?

• Does roof pitch vary according to size?

• What type of roofing do you offer for each style? E.g., PBR, asphalt shingles, architectural shingles, etc.?

• What roof overhang options do you offer? Are any roof overhangs standard for a certain style?

• Do you offer any dormer? E.g., standard dormers, dollhouse dormers?

• Do you offer any roof accessories such as hay hoods or widow’s peaks? Examples below:

Widow’s Peak

Leans, Porches & Attachments

Starting Designs

• We support two main attachment types: leans and gables (shown below). Both can have any wall opened to create a “porch” or a partially enclosed “run-in”. What types of attachments would you like to represent?

Gable

Attachment Options

• Do your lean attachments have the ability to wrap around corners? This creates a hip-roof:

• Do your lean attachments have the ability to extend from corners with a gable roof? This creates a gable pop-out:

• Are your standard lean wraparounds able to “meet” in the middle of a sidewall? E.g., one continuous wrap?

• Do your attachments apply only to certain building styles?

• Are there any sides to which attachments cannot be added? E.g., “do not add leans to the gable ends of buildings”

Size

Basic Styles

• For each style created as your starting design, please give us the available lengths, widths and heights.

• Please report any associated changes that come along with basic size changes. For example, “Buildings over 60 feet wide have a pitch of 3/12”

Attachments

• For each attachment you support, please give us the available lengths, widths and heights.

• Please report any associated logic that is based on your building styles. For example, “length of attachments should never exceed the length of the main building”

Siding, Wainscot, Trim & Insulation

Siding

• What types of siding do you offer?

• Are their certain colors for certain siding types?

Wainscot

• Do you offer wainscot?

• What is the standard height of your wainscot?

Trim

• What is the width and depth of your trim?

  • Standard Trim

  • Fascia Trim

  • Component Trim (around doors and windows)

• Do you have any special trim options you offer?

Insulation

• What types of insulation do you offer?

• At what level of detail (for what parts of the building) do you allow customers to add insulation?

• If you offer more than one type, do you allow the customer to mix more than one type in a building?

• Can you create a discrete list of the most typical and standardized options?

Doors, Windows & Exterior Options

Doors

• What are the names, details and sizes of any single doors you would like to offer?

• What are the names, details and sizes of any double doors you would like to offer?

• What are the names, details and sizes of any garage doors you would like to offer?

• What are the names, details and sizes of any overhead/roll-up doors you would like to offer?

• What are the names, details and sizes of any sliders you would like to offer?

Windows

• What are the names, details and sizes of any windows you would like to offer?

Exterior Options

• What are the sizes and details of any cupolas you would like to offer?

• What are the sizes and details of any shed dormers you would like to offer?

• What are the sizes and details of any dollhouse dormers you would like to offer?

Colors

• What color options do you offer for the siding of your buildings?

• Are your roof, trim, wall, and wainscot color options the same?

• Do you allow customers to change side wall color independent from end wall color?

• If needed, can you provide RGB/HEX values or high quality textures for your color options?

Trusses & Frame Spacing

Trusses

• What trusses do you offer? Our options are red iron, post & beam, web steel or post frame.

• Do your trusses vary by factors other than building width?

• Do you allow customers to select from multiple truss options?

Frame Spacing

• What are the available lengths that you offer between trusses?

• Do you allow customers to select these lengths, or are they automatically tied to the size of your buildings?